Worker’s Left Hand Pinned in Printing Press Roller in Zhongshan: Firefighters Cut Rollers in 20-Minute Rescue, Issue Safety Warning

Published:2026-10-03 · Industry News

At 18:00 on July 12, a critical incident occurred at a factory on Guanjiang Road, Henglan Town, Zhongshan City, Guangdong Province: an employee operating a printing press had his left hand trapped by a roller and could not free it. After the 119 command center received the alarm, Henglan fire rescue immediately dispatched 3 fire vehicles and 14 officers and firefighters to the scene.

On arrival, firefighters found the trapped worker bare-chested and lying prone on the press, with his left hand pinned beneath the printing press roller. The factory owner said the roller was made of solid iron and measured about 10 cm in diameter.

Based on the situation, the commander assigned crew members to use a pry bar as a lever to widen the gap, reducing the pressure on the worker’s hand while calming him. The team then covered his head and hand with clothing to block sparks and prevent secondary injury, before using a metal cutting machine to cut part of one end of the roller.

After 20 minutes, the two rollers involved in the rescue were severed, and the trapped worker was freed. Medical staff gave emergency wound care and transported him to hospital for further treatment.

The fire department noted that industrial production relies on close human-machine interaction, making accidents difficult to eliminate entirely; among such incidents, safety accidents involving printing presses and die-cutting machines are the most common. It urged company leaders to strengthen safety training and upgrade equipment to raise the safety factor, and reminded machine operators to stay focused and follow standard procedures to prevent accidents.

——This article is reproduced from China Packaging Network (pack.cn), original link: http://news.pack.cn/show-377774.html

Related reading

  • Chongqing to Host 18th China International Exhibition of Raw Materials, Equipment & Packaging for Household Chemical Products in November 2026
    2026-10-03Industry NewsSource: China Packaging Network

    The China Cleaning Industry Association will hold the 18th China International Exhibition of Raw Materials, Equipment and Packaging for Household Chemical Products in Chongqing on November 11-13, 2026, to deepen upstream-downstream exchange and drive high-quality development. The 46th (2026) China Cleaning Industry Annual Conference will run concurrently.

  • Wuxi Evaluation Confirms Two Smart Fruit and Vegetable Processing Equipment Innovations as Domestically Leading and Internationally Advanced
    2026-10-03Industry NewsSource: 食品机械设备网

    On September 28, the China Food and Packaging Machinery Industry Association organized a technological achievement evaluation meeting at Jiangsu Kaiyi Intelligent Technology Co., Ltd. to assess two innovations: 'Intelligent and Efficient Crushing and Thawing Technology and Equipment for Barrel-Packed Frozen Fruit and Vegetable Juice' and 'Intelligent, Precise, Energy-Saving and Environmentally Friendly Hot Air Drying Technology and Equipment.' Academician Chen Jian chaired the evaluation committee, which unanimously concluded that the overall technology of both achievements is domestically leading and internationally advanced.

  • Gansu Yuyuan Natural Mountain Spring Water Project Enters Full Production, Packaged Drinking Water Capacity Reaches 80,000 Tons Annually
    2026-10-03Industry NewsSource: 食品机械设备网

    Gansu Yuyuan Technology Development Co., Ltd.'s natural mountain spring water project has officially entered full production, moving into large-scale, standardized mass production and bringing Longnan-produced natural mountain spring water to market. Located in the Longnan Economic Development Zone (Chengxian Hongchuan Industrial Park), the project has a total investment of 102 million yuan, covers 19,500 square meters, includes 12,000 square meters of building area, and is built in two phases.

  • Separation Fresh-Keeping Packaging Enters Mass Production as Gaishi Technology's Xianle Cap Super Factory Starts Up in Xianning
    2026-10-03Industry NewsSource: 食品机械设备网

    A ceremony in the Xianning High-tech Zone has marked the start of production at the Xianle Cap Super Factory of Gaishi Technology (Xianning) Co., Ltd., together with the launch of its SUPER YOUNG fresh-brew beverage — adding another benchmark enterprise to the city's high-activity healthy beverage sector, one that combines core technology, large-scale manufacturing and brand operation. The smart factory represents a total investment of RMB 200 million and a planned annual capacity of 120 million bottles. Investment was introduced by Xianning Jingui Industrial Investment Partnership (Limited Partnership), and the project is a key investment promotion item of the Xianning High-tech Zone.

Contact us for a quote

For samples, pricing or technical support, call us or leave a message and we will reply shortly.

134-1230-3528 Contact us